Cooling down the room during the heated summer days is what an air conditioner is responsible for. Having the system stop working correctly when you need it can be downright irritating. If this happened to your Haier portable AC unit, don’t worry yet or rush to call a repair technician, as you may be able to fix the issue by doing some troubleshooting.
Below, you will discover a Haier portable air conditioner troubleshooting guide that involves blinking light indicators and error codes.
Haier Portable Air Conditioner Red Light Blinking
If your Haier portable AC unit displays a blinking red light, there’s a high chance that it experiences a full water tray. It won’t be able to operate until you drain all the water. To perform this task, pull the small black tube with a plug under the unit. Tip it down carefully and drain the water as much as possible. After you’ve drained the water tray, set back the plug-in and activate the unit again.
It is also possible that the air filter is dirty and needs to be cleaned. Cleaning the AC filter should be done at least once every week or as recommended by the Haier manufacturer in the manual book.
Read also: How To Clean Filter LG Portable Air Conditioner
You can draw the filter by pulling the tab on the AC’s back, then vacuum or wash it. If you prefer to clean the filter, shake it thoroughly to remove any excess water and trapped dust and particles within the component. Install the filter back after it is cleaned.
Haier Air Conditioner Fault Codes
Another easy way to do troubleshoot for your Haier portable air conditioning system is by checking the displayed error code. Please read the list of error codes below and how to fix each of them.
For Haier portable AC models from 2016 or older:
- E0: Indicates electrical-related issues, such as excessive electric power consumption or low voltage. In some cases, this might be linked to the circuit breaker in your home. To resolve the issue, unplug the portable AC for 10 minutes. This reset often gets the air conditioner working again. If the problem persists, you may need to replace the unit.
- E1: Signifies jammed button on the unit’s keypad. Unplug the portable AC from the electric supply, reset the switches by pressing every button thoroughly, and then plug it back. You may need to replace the unit.
- E4: The built-in tank that needs to be emptied regularly has something stuck. Open the tank and check if there’s any debris that prevents its operation.
- STOP: E4: The built-in tank that needs to be emptied regularly has something stuck in it. Empty this component and open it to check if there’s any debris that prevents its operation.
- High Temp: The surrounding temperature is above 99°F. If this code appears, but the room temperature isn’t over 99°F, you may need to replace the unit.
For Haier portable AC models from 2017 or newer:
- E1: Sensor failure on the coil pipe or tube temperature. Examine the sensor and circuits related to it. You may need to replace the unit.
- E2: Sensor failure at room temperature. Examine the sensor and circuits related to it. You may need to replace the unit.
- E4: Issue with anti-frost protection. Activate the function again if it doesn’t need anti-frost protection anymore. You may need to replace the unit.
- FL: Full water chassis. Drain the water chassis and restart the AC.
How to Fix Haier Portable Air Conditioner
Various issues can arise with your Haier Portable air conditioner, but a frequent concern is the unit’s failure to adequately cool the room. This often results from the air conditioner working overtime to reach the set temperature.
Checking the circuit breaker and ensuring it hasn’t tripped can also be a quick fix for this issue. Try checking the temperature setting to ensure it is correct and not changed.
Other common problems include a dirty air conditioner that requires you to clean the unit to fix the operation. Most times, the filter needs to be cleaned or replaced.
Read also: The Most Common Air Conditioner Sickness Symptoms
The majority of portable air conditioner problems can usually be resolved by resetting the unit. The precise location of the reset button may differ according to the particular model of your Haier portable AC.
To troubleshoot a Haier air conditioner that’s not producing cool air, you can also check if the unit is in the cool mode and properly plugged into an electrical wall receptacle with proper voltage. If the issue persists, the room may have appliances that produce heat and affect the cooling performance, requiring further Haier air conditioner troubleshooting.
Read also: Arctic King Portable Air Conditioner Troubleshooting
If the problem persists for a while, you can try the official Haier customer support team via call at 1-877-337-3639 or plan a schedule through its website. Otherwise, you may contact the local AC repairman to help perform Haier portable air conditioner troubleshooting and fix the issue according to the diagnosed problem.
